1. System should resume from hibernation correctly if USB device is installed or
"USB Legacy Support" is enabled.
2. If AGP card is installed, press "F2" should be able to enter the BIOS setup.
3. If system memory is < 256 MB, on-board VGA shared memory would be set to 32 MB.
If system memory is >= 256 MB, on-board VGA shared memory would be set to 64 MB.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download the FLASH.EXE and copy FLASH.EXE to the just created boot disk in step 1.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save to the disk you created in step 2.
Boot from the disk you created in step 3.