Hewlett Packard (HP) omnibook 600c Free Driver Download
Hewlett Packard (HP)
Supported Operating Systems
Please print this file so you don't skip any steps.
During OmniBook Setup, the setup process resumes
after you close this window.
To upgrade your OmniBook 600 to Windows 95, you need the
- A set of OmniBook upgrade disks (Windows 95 HP BIOS
version 4.0 and Windows 95 HP Drivers Disk 1 and 2).
- Standard Microsoft Windows 95 setup disks or setup
An A/C adapter for your OmniBook.
The 3.5 inch floppy drive for your OmniBook.
You must following the steps below to properly
upgrade your OmniBook 600 to Windows 95. These steps
are described in detail following the Overview. If
these steps are not followed in exact sequence, your
software configuration may become unstable and you will
have to start the proc
John O'Neal (DG Member) on 6/2/2004
Already tried it? Give your review
Embed a link to this page