Step 2. Note the settings of the SETUP parameters. Enter SETUP by hitting the Delete key during boot up. Write down the settings for each of
parameters. At the end of the BIOS update process you should load the setup defaults, and then re-enter these values you have written down.
Step 3. Insert a bootable floppy into drive a:. (Make sure the floppy does not have a config.sys or autoexec.bat file on it)
Step 4. Extract the contents of the .ZIP file you downloaded, onto the bootable floppy.
Step 5. Place the bootable floppy containing the BIOS files into drive a: of the system that you want to upgrade and boot the system while from floppy
diskette in the drive.
Step 6. At the command p
|BCM jetway663aspro (Windows 2000 Server) [PCI / ISA] 1 reply||Dec 3, 2006|
|BCM BCM QS440BX 128KB - 11/16/99-i440BX-W977TF-2A69KB3EC-00 (Windows 2000 Server)||Jul 14, 2005|