QMS DeskLaser600 Driver Reviews

User Reviews and Ratings

Only reviews are shown below.  Ratings submitted without a review are used in calculating the total ratings shown above, but will be displayed below.

3 of 4 people found the following review helpful:
Annelie Sandberg
Tested on Windows XP
26 Oct 2005
 

Installation: 1 out of 5
Stability: 1 out of 5
Compatibility: 1 out of 5
 
"Fungerar inte till xp"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
XEON
Tested on Windows XP
6 Oct 2005
 

Installation: 5 out of 5
Stability: 4 out of 5
Compatibility: 4 out of 5
 
"Got so frustrated coz I couldn't get the QMS Desklaser 600 to work with any drivers, thanx guys!

Greetz - XEON

xeon_54@hotmail.com"

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
jola

24 May 2004
 

Installation: 1 out of 5
Stability: 1 out of 5
Compatibility: 4 out of 5
 
"hilfe, habe alle 4 treiber für win xp für meinen desklaser 600 ausprobiert und keiner läuft

HILLLFFFEEEEE !!!!!!!!!!!!!!!!!!!!!!!!"

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
andy

6 May 2003
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"The HP Laser Jet Drivers will only work for the 600p. This model emulates PCL6 apparently. For a basic QMS Desklaser 600 you need Windows Printing System Driver. I have just installed this driver on XP home and it works fine. I downloaded the driver and unpacked it. Deleted all other printer drivers from my system. Edited the registry as recommended 1. run 'regedit
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Lars

19 Jan 2003
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"Thanks a LOT Leslie! "The HP Laser Jet 5000 Series" works perfect even with some pdf's which has caused me problems earlier."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Leslie Schnee

3 Jan 2003
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"XP Users After trying for days and nights with varios XP drivers offered here and at other places, I was about to give up and throw the printer away.. But it´s so easy to solve the problem.. simply install your qms dl 600 with XP´s standard printer driver "HP Laser Jet 5000 Series PCL".. it works with absolutely NO problems!! Greets Leslie"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Milo

14 Oct 2002
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"Hy Timo! First I had that problem with the cable - then I read this about the access to the root registry. I've all done how you had written, but all the same - "Check Cable or Power" what else can I do? I have Windows XP - Home Edition (German)"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Timo

27 Sep 2002
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"As J wrote, it's important that you have access to the root of your registry. 1. run 'regedit' 2. open 'HKEY_LOCAL_MASCHINE' 3. open 'SYSTEM' 4. open 'CurrentControlSet' 5. right click on 'ENUM' 6. choose 'Permissions' 7. give full permission to everyone 8. Install the driver 9. remove the full permission again 10. restart"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
J

21 Jan 2002
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"Brilliant, brilliant, brilliant. Thank you. I had a little trouble with the registry import - although an administrator, I didn't have permissions for the Root key, but I gave myself that and all went well. Thank you."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Timo

19 Nov 2001
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"Another possible installation error you are not loged on as administrator. It might be neccessary to have admin rights to install the driver correctly. I'll try to install the driver on another machine with blank XP installation, to see what errors might arise and how to fix it."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Timo

19 Nov 2001
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"If Status Monitor tells to 'check cable ...' try the following let the monitor window on top switch printer off and on again (slowly) the press 'resume' at the monitor. The driver is untested with network printers, so i can't tell how to fix."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Joe

18 Nov 2001
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"I tried this driver on XP home version without success. The status monitor gives the error message that the cable connection is incorrect and/or that there is a power problem. Has anyone had any luck or know of a fix?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Japao

28 Oct 2001
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"Driver works fine with my XP pro, but when i try to print over network an error - could not connect with the QMS DeskLaser600 Status Monitor... - . How to slove that problem?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 

Add Your Review

Ratings & Reviews may be submitted after downloading and using or attempting to use the driver or firmware.

This website is not affiliated with QMS. All company names/logos are properties of their owners.
server: ftp, load: 1.89