1. Home
2. Manufacturers
3. Mitac
4. Mitac 5114vu Driver
5. Reviews

Mitac 5114vu Driver Reviews

User Reviews and Ratings

Only reviews are shown below.  Ratings submitted without a review are used in calculating the total ratings shown above, but will be displayed below.

3 of 4 people found the following review helpful:

Adam Neuhaus
Tested on Windows 2000 Professional

8 Mar 2009
(9 hours after download)

 

Installation:

Stability:

Compatibility:

 

"corrects "80-pin connector not installed" for primary ide. lots and lots of settings in the bios to get it tweaked. best of all is this will allow you to use a PCI video card and disable the onboard cpu/mem hog. I believe i used awdflash742.exe to write the bios."

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Buck
Tested on Windows 98SE

24 Aug 2007

 

Installation:

Stability:

Compatibility:

 

"MiTAC 5114 VU motherboard. Click on 5114flash.exe to extract 4 files. I was not able to use the awd5114.bat file like the instructions on the txt file indicate. However, after booting to an A:/, I was able to type awdflash765.exe to start the flash process. From there just follow instructions to save the old bios file and type in the new bios file: 51141107.bin. Once

See More

flash process was complete, rebooted and pc recognized BIOS as 2001.11.07. New BIOS fixed 80 pin cable error message and hard drive shows up correctly as ATA 66 instead of ATA 33 at startup. Works perfect!"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Pablo

22 Mar 2007

 

Installation:

Stability:

Compatibility:

 

"No sirve para las compaq"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

H. J.
Tested on Windows 2000 Professional

20 Feb 2005

 

Installation:

Stability:

Compatibility:

 

"May work with others, but not with my board. It will only take drivers from oe motherboard."

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Dan C

30 Aug 2002

 

Installation:

Stability:

Compatibility:

 

"Thanks for the flash, I had to rename the files to the dos 8.3 format then the install went ok, got rid of 80 pin message, and it sees up to ata 66 on my 3 HD, thought this might remedy the 256 per DIm limit on the ram but i guess that's a board limitation."

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Chuck

28 Feb 2002

 

Installation:

Stability:

Compatibility:

 

"I was going crazy trying to figure out why my new Seagate Barracuda was runing ATA33 and I was getting that 80 pin message. Thanks for the bios. So far so good!!!"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Greg Allen

20 Jan 2002

 

Installation:

Stability:

Compatibility:

 

"I had 2000.09.04 Bios and flashed your bios in to upgrade to 2001.11.07 I still have the "no 80 pin connector" error . What is next. Greg Allen"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

robert schlemmer

8 Jan 2002

 

Installation:

Stability:

Compatibility:

 

"driver does all it claims and more. ATA66 seems to be working great. The poorboy 5114 with 233MMX handles 46GB ATA100 drive beautifully. Every bit as useful and usable for business purposes as a new 1.4GB P4 Dell"

Was this review helpful? (Report this)

 

Ale
Tested on Windows 2000 Professional

16 May 2015
(1 hour after download)

 

Installation:

Stability:

Compatibility:

 

"Installed it on a "Compaq Camaro" board to get rid of the useless Compaq BIOS. Works perfectly, but has to be flashed with UNIFLASH instead of the included program!"

Was this review helpful? (Report this)

 

Ale
Tested on Windows 2000

16 May 2015
(2 minutes after download)

 

Installation:

Stability:

Compatibility:

 

"Installed it on a "Compaq Camaro" board to get rid of the useless Compaq BIOS. Works perfectly, but has to be flashed with UNIFLASH instead of the included program!"

Was this review helpful? (Report this)

 

Add Your Review

Ratings & Reviews may be submitted after downloading and using or attempting to use the driver or firmware.