1. Home
  2. Manufacturers
  3. NEC
  4. Printer
  5. NEC Minolta PageWorks/Pro 1100L Driver
  6. Reviews

NEC Minolta PageWorks/Pro 1100L Driver Reviews

User Reviews and Ratings

Only reviews are shown below.  Ratings submitted without a review are used in calculating the total ratings shown above, but will be displayed below.

3 of 4 people found the following review helpful:
S
Tested on Windows XP
6 Aug 2009
(2 years after download)
 

Installation: 3 out of 5
Stability: 3 out of 5
Compatibility: 1 out of 5
 
"This is an old printer and would not work on XP. Not this driver's fault."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
dakinelolo
Tested on Windows XP
7 Feb 2008
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"Worked easy as pie on my NEC 660+ superscript printer in XP. Thank You Very Much"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
wizart

17 Jan 2008
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"working good on WIN XP"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Dave
Tested on Windows 2000 Professional
2 May 2007
 

Installation: 1 out of 5
Stability: out of 5
Compatibility: 1 out of 5
 
"BSOD during install on W2K SP4. 3 times."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Dave
Tested on Windows 2000 Professional
2 May 2007
 

Installation: 1 out of 5
Stability: out of 5
Compatibility: 1 out of 5
 
"BSOD during install on W2K SP4. 3 times."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Carl M
Tested on Windows XP x64
9 Nov 2006
 

Installation: 3 out of 5
Stability: 2 out of 5
Compatibility: 2 out of 5
 
"Does n ot work with Win XP"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Thomas Kahnhäuser
Tested on Windows XP
12 Oct 2006
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"wasn`t easy to find, but works perfectly"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Mark Roberts
Tested on Windows XP
30 Sep 2006
 

Installation: 4 out of 5
Stability: 4 out of 5
Compatibility: 5 out of 5
 
"As the others have already noted, this works."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Jaye
Tested on Windows XP
7 Sep 2006
 

Installation: 3 out of 5
Stability: 4 out of 5
Compatibility: 4 out of 5
 
"Thank you very much for the NEC SuperScript 660plus driver. You are the only place that I found it and could actually download something I can use. The other web sites were too technical for an old-young- hearted person like me. I'm not a techie.

The driver is a little different from the original, but I made a few simple adjustments and I'm pleased with the results. I'm

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Kristy
Tested on Windows XP
12 Aug 2006
 

Installation: 4 out of 5
Stability: 1 out of 5
Compatibility: 1 out of 5
 
"I installed via Minolta set up and so have the printer on my XP (using a parallel-USB adapter), but it won't print at all. Please help--email me please at kristy_baik@yahoo.com. I would really like to use my NEC printer."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Korl
Tested on Windows XP
23 Apr 2006
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: out of 5
 
"Substitute driver for NEC Superscript 660 Plus Laser printer!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
JAY
Tested on Windows XP
20 Mar 2006
 

Installation: 4 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"AFTER 4YERS I AM ABLE TO USE MY NEC 660PLUS

PL,FOLLOW INSTALL INFORMATION POSTED BY CHENLGYQ IT WORK PERFECT WITH WIN XP-SP2

THAKS DRIVERGUIDE

THANKS CHENLGYQ

JAY G

"

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
david
Tested on Windows XP
16 Jan 2006
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"this driver was a life-saver! I downloaded the driver and ran the setup.exe per the Readme.txt. Voila! the printer was installed and I didn't have to run any other setup. Works like a charm.

I had the printer installed and on when I executed the setup.exe.

Thanks for a great service!!!"

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
chenlgyq
Tested on Windows XP
18 Dec 2005
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"It is very very good and true driver for the NEC SuperScrip 660plus, althrough the printer name will be showed as "Minolta ......" after installed. It saved my printer.

Something about the installation here I would like to point out:

First, you should unzip the file you downloaded;

Second, go to the unzipped folder to fine the Setup file and execute it

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Harold Schogger
Tested on Windows XP
9 Dec 2005
 

Installation: 4 out of 5
Stability: 4 out of 5
Compatibility: 3 out of 5
 
"it was fine but little erro which I am still trying to resolve"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
randy

28 Aug 2005
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"driver works great.

only problem is the new hardware keeps showing up.

it is now getting annoying.

any idea on how to get rid of it.

"

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
mike
Tested on Windows XP
24 Aug 2005
 

Installation: 3 out of 5
Stability: out of 5
Compatibility: out of 5
 
"i get "printer cover open" message, but turned the printer off and on and seemed to get past that... however, i get garbage that prints at the bottom of the first page every time.. for about 1 inch.. rest of document seems fine.. doesn't seem to matter which word doc i print.. the same result"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Sandra
Tested on Windows XP
16 May 2005
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"This driver solved all my problems!! I have an older (but very reliable) NEC Superscript 660plus laser printer, which is no longer supported by either NEC or Windows as far as having drivers available for newer operating systems (like Windows XP). I had almost resigned myself to having to buy a new printer, since I could not find a driver that worked with XP. But the do
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
maciek
Tested on Windows XP
28 Mar 2005
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"works well with nec superscript 660 plus. you can get message about open tray, then just turn off and turn on printer (see also other comments and solutions of this problem)."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Jerry
Tested on Windows XP
6 Feb 2005
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"It works on Windown xp. But I just tried once and only one page."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Timmy Tim
Tested on Windows XP
29 Dec 2004
 

Installation: 4 out of 5
Stability: 2 out of 5
Compatibility: 1 out of 5
 
"I also get a 'no paper in tray #1' error, although I have had some success with doing a print to .prn file and then using the minolta print console to add files to the print queue. Still a bit pants tho.."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Joe
Tested on Windows XP
15 Dec 2004
 

Installation: 1 out of 5
Stability: 1 out of 5
Compatibility: 1 out of 5
 
"Having problems installing this driver."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
peter

10 Nov 2004
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"it do not work with xp, but the driver is ok"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Brian C

31 Oct 2004
 

Installation: 4 out of 5
Stability: 4 out of 5
Compatibility: 3 out of 5
 
"Driver works for me ok with NEC SuperScript 660plus in WinXP pro (both SP1 & SP2). Haven't found any other driver that will work for this combo.

New hardware wizard keeps showing up each time restart tho; just cancel that dialogue.

Haven't tried changing the UPS settings as David described above. But this works: When "cover open" message appears,

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
tws

20 Oct 2004
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"will not work with windows xp"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Phuong

10 Oct 2004
 

Installation: 4 out of 5
Stability: 4 out of 5
Compatibility: 1 out of 5
 
"This driver did not work on my Superscript 660. Message displayed "Cover Open".?????????"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
chris

23 Sep 2004
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Sorry, typing error: it's the superscript 660 on win2k.

Any help would still be greatly appreciated."

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
chris

21 Sep 2004
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I tried this driver with the superscript 600 (plain, not plus) on Win 2000 but couldn't get past the "cover open" - problem. Can anybody help me with that?

Thanks a lot

Chris"

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
chris

11 Aug 2004
 

Installation: 5 out of 5
Stability: 3 out of 5
Compatibility: 1 out of 5
 
"There must be something better that this download. I keep getting a "cover open" message. My cover is not open. Most of the time the printer won't print more than one page."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Brian

26 Jun 2004
 

Installation: 1 out of 5
Stability: 1 out of 5
Compatibility: 1 out of 5
 
"Caused Windows 2000 to crash and did not install NEC Superscript 660 Plus."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Loc

28 May 2004
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"OK now that everyone else all over the globe knows, can someone tell me the official answer: What's the solution to the "cover open" problem? I can't find that "power properties options" thing under printer properties. I have Xp Pro with just a plain 660.

Thanks y'all."

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Lachlan Chong

16 May 2004
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"When I try to open the driver file pp11l_us.exe to self extract it, a message comes up saying it is not a valid Win32 application. What does that mean and what do I about it??Thanks."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Wally

22 Apr 2004
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 4 out of 5
 
"I chose this driver for NEC SuperScript 660 Plus

However may print multiple pages when printing from MYOB."

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
BJ

20 Mar 2004
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Does any one know where I can get a NEC 660Plus driver for Window 2000? NEC does not offer any software support. Seems like they don't care about their customers after they get your money. NEC SUCKS!!!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Keith Kim

4 Mar 2004
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I have loaded the driver, used it for few times, dealt with cover open error. But now I have 'no paper in tray #1' error. I've look through comments to find an answer but did not find any. Could someone help? pls... Thank you

"

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Colin Raines

18 Jan 2004
 

Installation: 4 out of 5
Stability: 4 out of 5
Compatibility: 4 out of 5
 
"Until I found your site and located this driver, I thought I'd have to buy another printer. The download and subsequent install was very easy and it's working as good as it ever did, only now on Windows XP home. Thanks very much."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Mark

1 Dec 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I had the problem of cover open. I did the following steps as said below, and now it works perfectly. 1.open "Power Option Properties" 2.in UPS/ Detail, select Manifacture Generic Model Custom. Leave other options as default. This really works so give it a try! It does seem unlikely it will work, but it does!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Leland

8 Nov 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Wow, great driver. I almost wanted to throw away my printer because no driver support on win2k/xp. Great driver. I even can print chinese in my xp. Original NEC driver can not price chinese on windows95/98. Many thanks to TK. Now, I have to find toner to extended the printer life."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
LAROCHE

15 Oct 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I will never buy again a product from NEC"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
David

2 Oct 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I have tried to get this *** of a *** to work but XP and NEC don't match. This is the first printer I have ever had to just throw away. Working that is!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Marc

22 Sep 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I seem to have gotten it to work well (XP Home, Superscript 660 Plus). After turning on the printer, I must reset the port for the printer to LPT1 and then back to PW1 again, then the "Minolta" will print perfectly until I shut down the computer. Thanks TK for the driver."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
vernon moore

21 Sep 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"is this minolta printer a gdi printer? as this is the type of driver needed"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Marc

20 Sep 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I have my old SuperScript 660 Plus with a new Windows XP system. After running the Setup program, I can print a test page, but nothing else. When I try to print from an application, the print job never gets transmitted to the print queue (no jobs ever show up there). Does anybody have any suggestions? Thanks."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
operabadge

17 Sep 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Win2k SP4 breaks this driver and causes spontaneous reboots on any access of it (including opening a program that has it as the default printer). Here are links to a fixed driver from Minolta www.crucialpc.com/drivers/1100l_2k_sp4.zip If you can't get to that directly, go here and register, then click the link forum.crucialpc.com/viewtopic.php?p=4854#4854 Good luck..
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Nick Wyers

1 Sep 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I am having the "cover open" problem using this driver(PP11lUS.exe on a SuperScript 660 Plus.It prints a test page OK after that I get the "cover open" and it won't print. I hope someone can come up with a fix.Please Email me. Thanks Nick"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
TW

22 Aug 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"OK, I solved my networking problem. I was able to leave the printer plugged into the WinXP machine. The solution was to install the MINOLTA 1100L driver (not the NEC driver) on the Win98 machine. Minolta has made this driver easily available at . The whole WinXP/Win98 network is now printing like a charm on the "Minolta.""
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
TW

22 Aug 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"The XP setup went ok (I did have some of the "open cover" trouble reported by others). But what if I want to share the printer with a Win98 printer on the network? Different setups produce blank pages or half pages. I'm trying to use the WinXP "install additional drivers" with the NEC CD, but I get as far as the list including "660 plus," but when I choose it, the prope
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
ryan

20 Aug 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"NEW QUESTION?????? Does anyone have any idea what driver to use with windows server 2003. I used the minolta on my old 2000 pro/server and it worked fine. I get a failure error when loading the driver on server 2003. can anyone help me Ryan"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
steve

20 Aug 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Downloaded the driver and ran the setup.exe, but failed to installed the drive. Everytime the pc rebooted. I am using w2k pro. Found out an error message in file C \WINNT\setupapi.log, says "Copying file c \documents and settings\administrator\desktop\11l_us\ disk1\PwLanMon.dl_ to C \WINNT\system32\PwLanMon.dll. An unsigned or incorrectly signed driver (c \document
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
June

15 Aug 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"The driver installed superscript860 and not 660. Can't print the test page. Everything seems to be installed, but nothing appears in the printers window when trying to print. Can somebody help me? thanks..."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
spaceball

10 Aug 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Has anyone of you actually gotten a SS 660 (plain) to work with win XP/2K? If you have please tell me how couse I still get the cover open message, after trying instructions on this page. Also I think we all should write wery angry letters to NEC demanding that they release drivers for windows XP/2k and/or linux."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Angela

31 Jul 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Driver woked great for about 2 days. encounterd "cover open" error which was solved by using fix offered on this site. but now won't print! Status display says no paper in tray 1. but I have tons of paper in tray 1. anyone else have this problem? how did you get around this one? any and all help is greatly appreciated. Angela."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Linda

30 Jul 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Has anyone found a driver that works with NEC SuperScript870? I know this one is ok for the 660 but I have an 870. HELP!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Jack

26 Jul 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"The driver worked fine for my NEC SuperScript 660plus with Windows XP. I encountered no problems at all so far. Thanks TK. Here is what I did 1. Downloaded and unzipped the driver. 2. Ran .\Disk1\setup.exe. This installed the "Minolta PageWorks_Pro 1100L" software. 3. Powered off the PC connected the printer, powered up the printer, and then booted the PC 4. "New har
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Micke

20 Jul 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Bonjour tout le monde, Je cherche un pilote pour ma NEC Silentwriter SuperScript610 (I prefer in French, as possible). Pouvez-vous m'aider ? Merci d'avance..."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
KW

19 Jun 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Thanks for this driver, which enabled me to keep using my NEC SuperScript 660plus, with Windows XP. The printer works fine with this driver. I encountered most of the problems described by others, during my very first use. But, with some of the fixes suggested here, the problems went away. This driver saved me a few bucks, extended the life span of my 660plus. Thanks
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
PS

12 Jun 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Worked like a champ. NEC Superscript 660plus with XP. The open cover pop up disappeared after restarting the printer and stayed off until computer restart. Not a big deal! However, I didn't have to trash the printer and buy another one. Thanks to DriverGuide. NEC better learn from this example to take care of it's first customers."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
alan

5 Jun 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"spoke too soon I had to re-install w2k and guess what - identical steps produced different results this time cover open this driver is too flaky to use unless your time has no value get a new printer made by HP."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
alan

4 Jun 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"works perfectly on win2k - new clean install all service packs and updates before driver install. did not check tray 2- no problems whatsover!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Arthur

1 Jun 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"hey there can you give instructions on how to get my 660 to start printing. at present it is say cover door open. And also what port do I run it in? regards Arthur"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
brent

19 May 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I also have the cover open problem, can you email me the fix? I have win xp and plain old 660. Thanks!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
hank

20 Apr 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"it worked great for xp pro. pulled paper and it showed jam opend window and followed inst. wroks great even maunual duplexing. I jsut installed it as per instructions and did not use tray two and you can deselect it in the program. tx saved me a lot of work as my HP 1220cx1 just went down so I dug this old gal out and it works great maybe I won't sell it now. thanks for yo
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Bob

16 Apr 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"2nd time had to download - lost hdd WORKED LIKE CHAMP!! NO PROBS!! DISAPPOINTED IN NEC FOR NOT UPDATING DRIVERS!! THANK YOU FOR THIS DRIVER!!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Darrell

3 Apr 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Just read the thread. I'm trying to find a driver for a NEC 660 (plain) that will work on Win2K. (Would also accept XP, for my wife's machine as a poor alternative.) Thanks in advance, Darrell"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Afshin

15 Mar 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"well i have the NEC SuperScript 660plus, i did installed the Minolta, the first thing that i get is No paper at tray one --> this is what the software says , but when i print, it prints fine for the first page, when i need to print a double side paper, after the first side, i have to feed it again, but i until i get the page out of printer and put it there, i get the pape
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
LOUIE LOUIE

15 Mar 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"HELLO PEOPLE... ANYONE EVER HEAR OF A NEC SILENTWRITER MODEL 95F POSTSCRIPT? IT HAS A LETTER SIZE TRAY AND A FOLD OUT FEEDER ON TOP WHICH I HAVE BEEN TRYING TO FIGURE OUT IF I CAN HAVE LEGAL SIZE PAPER THERE? IT ALSO TELLS ME THAT IT IS IN NEED OF MORE MEMORY? I HAVE IT CONNECTED TO WINDOWS XP? CAN ANYONE TELL ME IF THIS SIMPLY DOESN'T DO BOTH LEGAL AND LETTER SIZE PAPER?
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
scott

10 Mar 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Loaded the driver and it worked the first time! Running windows 2000 with the NEC Superscript 660plus. (When running setup, I did not check the "tray 2" box.)"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
wayne

6 Mar 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Dnlded & chkd for viruses-none found. Ran SETUP.EXE and everything worked flawlessly (printed test pg and worked on all applications). My printer is a SuperScript 660plus with Win XP Home OS. Thanks so much!!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Marko

27 Feb 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"My Win XP professional don`t want open a printer port (LPT1). If I connect the printer (NEC SS660) or not is the same, win don`t detect printer! Help me somebody! And this driver don`t help with this problem!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Lachers

22 Feb 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Hey guys - well i have Win XP and a 610+ have tried the minolta drivers, but not a valid win 32 app. Has anyone got a solution."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Ram

2 Feb 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I installed Minotla 1100 driver from the list of driver provided alongwith XP. Everything went well but the test page is not printing. I believe the driver of Minolta is not working. Can anybody on the list help me to get the printer work. Currently using WinXP Pro. Tx / Ram"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
klas

25 Jan 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"It is not working for me. I have the same prob, with the open tray... Sincerly Klas"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Cutajar

16 Jan 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"A method to solve the "cover open" problem at least for my case (XP Pro)is the following 1. start computer 2. start printer 3. print (gives cover open error) 4. press cancel job, and confirm 5. restart printer 6. from there onwards printer prints normally until next computer restart"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
raymond

14 Jan 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Ye, unfortunately, I am also getting "cover open" and cannot go any further, such as a test print and so on. Where can I also download a "fix" for this. Please help."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
mike

13 Jan 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I too as everyone else am having problems with the "cover open" error message. If you have the fix please email it to me."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
A Happy User

12 Jan 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Works great with a 660Plus and XP home edition. Thanks for the driver!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Gowri

12 Jan 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I have NEC Silentwriter SuperScript 660(plain) on Win2K. I downloaded & installed pp11l_us.exe. I get message "cover Open". Did any one get their SuperScript 660 work with Win200? Please help. Thanks Gowri."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
niz

9 Jan 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"It was working fine. Now I am getting the cover open e-mail me the fix."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
phil

3 Jan 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"It worked fine for us on a WinXp box with the NEC superscript 600plus."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Curt

30 Dec 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"When I attempt to open this file in Windows XP, I get a message that it is not a valid Win32 application. Any help is appreciated."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
MK

23 Dec 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I have the 610plus and i get the message cover open. I would appreciate if anyone out there can help, thank you."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Erik

23 Dec 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I'm also having difficulties with the Superscript 660 (plain, not plus) in win2k. Seems to be the same 'cover open' problem as everyone else. Previously listed fix doesn't work for plain 660."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Stan

17 Dec 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I previously noted I got it to work, but it messed up and I finally got a nice cheap usb port Hewlett Packard PSC bubblejet 750-works great but not a laser. NEC still works well on Win 98. Maybe I will try partitioning the drive on the XP computer and install Win 98 on that partition and it will work then."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Ben

15 Dec 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I driver works fine on Windows XP for me. Thanks TK"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Pär

14 Dec 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"This driver works OK for me. No problems so far. The Minolta dialogbox are very alike the dialogboxes in NEC s drivers. Same manufacurs!!?? or...."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Tony

9 Dec 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I called NEC. They say it's not the drivers. The proublem is that Microsoft 2000 and Later dos not support GDI Ports. The NEC 660 needs this. The last Microsoft product to suppotr GDI was Windows ME."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Dilip

9 Dec 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I am also having the "cover open" problem using this driver on a SuperScript 660 with XP Home as operating system. Please email me with a fix. Thanks so much!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Shannon

8 Dec 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I'm having the exact same "cover open" message on the 660 plus. I appreciate anyones help resolving this problem. Thanks"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Tom

2 Dec 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I'm with the rest of the group and am getting the cover open message. Please forward the fix, thanks"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
EKW

29 Nov 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"So nobody has gotten it to work with a plain 660??? I tried the fixes discussed by "Ton" and none of them worked - therefore I assume he was talking about 660+ I had just purchased new toner and don't want to give up this machine. HELP"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Aaron

26 Nov 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I am also having the "cover open" problem using this driver on a SuperScript 660 with XP Home as operating system. Please email me with a fix. Thanks so much!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Paul-John

26 Nov 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Hi! I have tried the file from TK, but I will get the message ´cover open´! What can I do? I have WinXP and Nec 610 Plus. Anyone that can help me? I have also got the error "Power off or cable problem" Please help!!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
tomjones

24 Nov 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"if anyone could make it work with a silentwriter superscript 660 i would like to have detailed instructions how he did, as it is not working with my one. thanks in advance !"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
noelli

24 Nov 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"it did not work with my superscript 660. if anyone could help me telling me how to make it work with XP, i would be very thankful. i can install it fine, but when i print, the printer-icon shows in the menu-bar for 1 sec. than disapears and nothing happens...please help !!!! THX"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Thomas

24 Nov 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"okay, without an email-address it makes no sense to ask for help."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Thomas

24 Nov 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I have the sampe problems like John and Stan ("cover open", superscript 660, windows xp). What is the fix? Please email me. Thanks"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
zac

18 Nov 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"It Works! download the file to a folder. unzip the file. click on the setup.exe file and follow instructions. setup says windows 2000, but I have XP and it still worked just fine. enjoy! I still can't believe that NEC didnt update their drivers for their product. bad move, my next printer will not be an NEC."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
HP

9 Nov 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Hi guys, I have a NEC 660Plus too and I figure out that I will never buy anything from NEC again as they have a very bad customer service. They discontinued the model and also stopped upgrading driver... a stupid ideal. They will be broke very soon!!!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Stan

25 Oct 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Finally got it to work. I tried the lpt1 port and then went back to the PW1 port.I then printed out all thes great comments."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Carlos

25 Oct 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Have a Silentwriter 660 with windows XP. Try the Minolta Driver and get the 'cover open' message. Not sure what UPS-detail means. I do not see UPS-detail in power options. Please help. Thank you very much!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Stan

25 Oct 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"When I used the fix for cover open, the printer stopped working. Now not possible to remove driver as uninstall complains about other programs running. New Dell with XP home."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Pierre

22 Oct 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Have the same problem cover open with superscript660 as anybody find a driver or a trick for this one? Please help Thanks"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
ND

19 Oct 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I have the same problem "cover open" for WinXP. Here are what I did 1.open "Power Option Properties" 2.in UPS/ Detail, select Manifacture Generic Model Custom. Leave other options as default. It works for mine then."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
ton

16 Oct 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"To fix "cover open" ploblem for win2k 1.open printer propertie 2.in paper tab select "manual" or "tray 1" in paper source box (I use "manual") 3.check box "tray 2" in Device Option tab........enjoy."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
chusak

13 Oct 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I had a problem with error message "cover open" too. Instead of "cancel", I turn off the printer and turn on again. It works for me. Those who have this problem, might want to try it."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
martin

18 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Sorry not with 660, with 610+."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Martin

18 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I had the same problem as others. I tried it with my superscript 660 on Windows XP Pro and just get the "cover open" message. Anything I can do?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Ralph

15 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I had the same problem as others. I tried it with my superscript 660 on Windows XP Pro and just get the "cover open" message. Anything I can do?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Ralph

15 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I had the same problem as others. I tried it with my superscript 660 and just get the "cover open" message. Anything I can do?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Gennadiy

14 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I'm also getting the 'cover open' message when I try to print. (Superscript 600, Win2k) If anyone has figured out the way around this, please email me. Thanks!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Anthony

12 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Worked well on my Win2000 laptop. But my WinXP Pro PC gets the "cover open" error. I checked into Minolta and the 1100L also gets this error under Windows XP. In fact, they have now stated that the US (110 volt) version of the PagePro 1100L is not supported for Windows XP. Oddly enough, the European 220V model is supposed to work just fine in XP. If anyone knows a fix
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
pawel

9 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"i have also the silentwriter 610 plus and i really need xp drivers"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Paul

8 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I also am having the "cover open" problem using this driver on a SuperScript 660. I hope someone can come up with a fix."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Dj

7 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"It works very well. Even did 2 up (2 pages on a page)."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
James

7 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I get no paper in tray message with my windows xp. Does anyone know a solution????"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
wetback

3 Sep 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"OK.. I can't get this to work either, it says there's no paper in the tray. Any one get it to work with XP Pro?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
jim

31 Aug 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Help, please--how does one run the "Minolta setup program" how does one get it where does one get it from? I'm lost here."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Glenn

29 Aug 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Good instaLll but "cover open" error and will not print any luck on a tweak?? Im running Win2K."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
pick

27 Aug 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"It's so good for me"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Scott

20 Aug 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Just wondering, will this work on the Silentwriter 660 Superscript too?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Semira

24 Jul 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I'm also getting the 'cover open' message when I try to print. (Superscript 600, Win2k) If anyone has figured out the way around this, please email me. Thanks!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
rullyandrianto

17 Jul 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"actually, i need driver for NEC printer drivermodel 610 Silentwriter Superscript for window XP , but i try this driver first"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Andy

10 Jul 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"It works ! Very smooth install. Many Thanks TK. Thought I would never get out of this bind when I upgraded to XP. It was like being stuck between a rock and a hard place trying to choose between buying a new printer or running two operating systems."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
duane

9 Jul 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I have been using the driver for a few weeks, but now I am also getting the "Cover Open" message. What is the fix? Please email me."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Eugene

9 Jul 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Thank you so much. I have heard people talk about this Printer not being able to work with XP for a long time. I am so glad I found this. Thank you again."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Jason

3 Jul 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"This driver also works on Windows 2000 Win2k with the 660+. Thanks TK!!!!!!!!!!!!! Maybe somebody should tell NEC about this so they can actually help their customers..."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Jim

22 Jun 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Thanks so much TK, you just saved me from having to buy a new printer. It works great!!!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Duane

22 Jun 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"This worked GREAT!!! Thank you so much - I thought I was going to have to get rid of this printer!!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Dante

18 Jun 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Amazing - just what XP Pro wanted!!!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Mark

4 Jun 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I ran the setup for the Minolta printer and it was the correct driver for my NEC superscript 660+. Runs great on Windows XP. Thanks!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Jeremy

18 Mar 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I had the same problem as John. I tried it with my superscript 660 and just get the "cover open" message. Anything I can do?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
schumi

9 Mar 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"thanks TK....good job!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Paula

6 Feb 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"This is the only thing I've found that works. Thanks very very much, TK."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
charlie

28 Jan 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"i have the same problem as john. i have a 660plus and i get the message "cover open" and it wont print. if anyone knows how to get around this please email me. thanks"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Magnus

22 Jan 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I am using this driver on Windows XP with the SuperScript660 Plus and it works perfectly. Thanks TK!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 

Add Your Review

Ratings & Reviews may be submitted after downloading and using or attempting to use the driver or firmware.

This website is not affiliated with NEC. All company names/logos are properties of their owners.
Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 1.56