Data Technology (DTC) UMAX UDS-is11 ISA SCSI Host Adapter Driver Reviews

User Reviews and Ratings

Only reviews are shown below. Ratings submitted without a review are used in calculating the total ratings shown above, but will be displayed below.

4 of 5 people found the following review helpful:

Armando García
Tested on Windows XP

12 May 2008

Installation:

Stability:

Compatibility:

"Don´t work in scanner Sceptre S1200"

Was this review helpful?

(Report this)

4 of 5 people found the following review helpful:

Ecotone
Tested on Windows 2000

26 Feb 2006

Installation:

Stability:

Compatibility:

"It didn't work well - locked up the system. I had to boot in safe mode and remove hardware/driver. Settings on the card were PnP and 0ws. Will move back to PnR with 0ws, and forego the driver. I'm told that it will work without the driver. I'm attempting to connect a UMax scanner."

Was this review helpful?

(Report this)

4 of 5 people found the following review helpful:

Peter
Tested on Windows XP

23 Jan 2005

Installation:

Stability:

Compatibility:

"Worked fine for me on WinXP"

Was this review helpful?

(Report this)

4 of 5 people found the following review helpful:

Bill
Tested on Windows 2000 Professional

31 Dec 2004

Installation:

Stability:

Compatibility:

"Win 2K had no problems finding and communicaling with my HP SCANJET IIc after installing this driver...."

Was this review helpful?

(Report this)

4 of 5 people found the following review helpful:

dennis

26 Aug 2004

Installation:

Stability:

Compatibility:

"this board is to old for xp pro."

Was this review helpful?

(Report this)

4 of 5 people found the following review helpful:

k.s. hunter

16 Feb 2004

Installation:

Stability:

Compatibility:

"no luck. running xp pro.

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"

Was this review helpful?

(Report this)

4 of 5 people found the following review helpful:

Cuc Tran

12 Nov 2003

Installation:

Stability:

Compatibility:

"WinXPpro, don't work. My board ISA SCSI board DTCT-436P used with Relisys Scorpio Pro."

Was this review helpful?

(Report this)

3 of 4 people found the following review helpful:

Alexandre (Atibaia/SP/BR)

10 Aug 2003

Installation:

Stability:

Compatibility:

"WinXPpro, don't work. My board ISA SCSI board DTCT-436P used with HR5 Scanner. The board is detected by Win, but look the Message after install "O Windows não pode carregar o driver de dispositivo para este hardware. O driver pode estar corrompido ou ausente. (Código 39)". I'm looking for a driver (for many years)."

Was this review helpful?

(Report this)

3 of 4 people found the following review helpful:

hrvoje

29 Jul 2003

Installation:

Stability:

Compatibility:

"what if is paralel not scsi"

Was this review helpful?

(Report this)

3 of 4 people found the following review helpful:

weixionghe

31 May 2003

Installation:

Stability:

Compatibility:

"Umax scanner 1220s driver"

Was this review helpful?

(Report this)

3 of 4 people found the following review helpful:

Mario

11 May 2003

Installation:

Stability:

Compatibility:

"It works! Thanks Andrew. I upgraded my OS to WinXP. XP defaulted to its own driver for the SCSI. Then my Iomega listed multiple drive letters. Its crazy, but works fine. But since its abnormal try to resolve it and then found you. I think this driver works for ISA only."

Was this review helpful?

(Report this)

3 of 4 people found the following review helpful:

Egon Zimmermann

27 Apr 2003

Installation:

Stability:

Compatibility:

"Sorry, does not work on my computer (win2k)Scsi-Adapter is not recognized."

Was this review helpful?

(Report this)