This is what worked for me.
Unzip and add Updcrx21.exe,
upd.bat, and the 9300_10c.bin
file to a floppy. Re-boot into
DOS. Insert disk. Type Updcrx21 9300-10c.bin /AT /M (or S depending on wether the drive is a master or slave). Re-boot after update and Enjoy ) p.s USE AT OWN RISK. I had a hard time booting back into windows after the update but after that was resolved, the drive worked well. Good Luck.
The following files are found inside the driver download file.
|HP Firmware upd/8200_10g.zip||289.4 KB||1 Mar 2001|
|HP Firmware upd/8200_10g.zip/820a_10g.bin||524.3 KB||13 Mar 2000|
|HP Firmware upd/8200_10g.zip/hpupdate.exe||274.4 KB||15 Mar 2000|
|HP Firmware upd/8200_10g.zip/readme.txt||3.8 KB||29 Sep 1999|
|HP Firmware upd/9100_10c.zip||170.9 KB||30 Sep 2001|
|HP Firmware upd/9100_10c.zip/9100_10c.bin||524.3 KB||1 Mar 2001|
|HP Firmware upd/9300_10c.zip||174.1 KB||27 Feb 2001|
|HP Firmware upd/9300_10c.zip/9300_10c.bin||524.3 KB||23 Aug 2000|
|HP Firmware upd/InsertCDR.txt||414 bytes||7 Oct 2001|
|HP Firmware upd/InsertCDR.url||80 bytes||7 Oct 2001|
|HP Firmware upd/Updcrx21.exe||198.0 KB||22 Oct 1998|
|HP Firmware upd/readme.txt||2.5 KB||1 Oct 2001|
|HP Firmware upd/upd.bat||30 bytes||1 Oct 2001|