2. Vcore value should be shown correctly.
3. When power on the system right after shutting down, system should boot up correctly.
4. CPU temperature should be shown correctly.
5. COM port mouse should be working if USB Legacy Support is enabled.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download the FLASH.EXE and copy FLASH.EXE to the just created boot disk in step 1.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save to the disk you created in step 2.
Boot from the disk you created in step 3.
At the "A:\" prompt, type FLASH, hit space bar once, and t
The following files are found inside the driver download file.
|X533_1.30||262.1 KB||15 Jul 2003|