1. Home
  2. Manufacturers
  3. Zenith
  4. BIOS & Motherboard
  5. Zenith 486 ISA ICU Driver
  6. Reviews

Zenith 486 ISA ICU Driver Reviews

User Reviews and Ratings

Only reviews are shown below.  Ratings submitted without a review are used in calculating the total ratings shown above, but will be displayed below.

4 of 5 people found the following review helpful:
Rob de Vree

15 Nov 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"After 12 retries The driver still can not be downloaded !!!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
James

24 May 2006
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"This works on a ZENITH Z-433D+ system!

My problem was the cmos battery failed and the bios lost memory.

To fix the problem I ran this file and extracted it onto a floppy diskette. I had to boot the Z-Z-433D+ with a seperate DOS floppy diskette because this file did not make a proper boot diskette, however, I used the CF.EXE that was extracted ont the diskette and

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
johnHenry

16 Nov 2004
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"doesnt work in 486 sx z400 series

"

spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Florentin

15 Oct 2004
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"For my old ¨ZDS 433S+¨ it was like a new heart!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
derek sibley

13 Apr 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"used cf.exe to overcome problems caused by a battery failure on the motherboard"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
darrelldean

11 Mar 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I am pleased to have found this .com"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Bill Schweder

17 Nov 2002
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Had A Z-433D+ that lost keyboard for some reasone, ran program now its fine thanks sure did help me a lot"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Simon Ginzinger

12 Jul 2001
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Thanks a lot. I couldn't get the driver to boot, but i just booted with a dos setup disk and ran cf.exe. this driver rescued my (well working) linux pc. thanks, simon"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Bob Saumby

6 Jun 2001
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"worked perfectly on a z-station Dn466. i looked high and low for this and finally found it here. thanks for uploading this, lee. oh - didn't work as a boot disk but i didn't need it to. i already had OS installed. just run cf.exe"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 

Add Your Review

Ratings & Reviews may be submitted after downloading and using or attempting to use the driver or firmware.

This website is not affiliated with Zenith. All company names/logos are properties of their owners.
Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 0.82