BIOS KR632 Driver
632-a10.zip (372.5 KB)
Step 2. Note the settings of the SETUP parameters. Enter SETUP by hitting the Delete or F1 or F2 key during boot up. Write down the settings for each of parameters. At the end of the BIOS update process you should load the setup defaults, and then re-enter these values you have written down.
Step 3. Insert a floppy disk into drive A. Format the floppy disk and make it bootable. (Make sure the floppy does not have a config.sys or autoexec.bat file on it)
Step 4. Extract the contents of the .ZIP file you downloaded, onto the bootable floppy disk that you created during Step 3.
Step 5. Place the bootable floppy containing the BIOS files into drive a: of the system that you want to upgrade and boot
Kodeeswaran (DG Staff Member) on 9-Oct-2004
|BCM Driver Update Utility||Install the driver automatically|
|BCM BIOS BC845DL Driver||Install the driver automatically||Download driver|
|BCM BIOS IN810 Driver||Install the driver automatically||Download driver|
|BCM EBC3610F Driver||Install the driver automatically||Download driver|
|BCM FX810E Driver||Install the driver automatically||Download driver|
|BCM GT693VA Driver||Install the driver automatically||Download driver|
|BCM KR632 Driver||Install the driver automatically||Download driver|
|BCM QS440BXP Driver||Install the driver automatically||Download driver|
|BCM RX815ELT Driver||Install the driver automatically||Download driver|
|Soltek SL-62B Driver||Install the driver automatically||Download driver|
The following files are found inside the driver download file.
|Kr632a10.rom||131.1 KB||13 Oct 1999|
|FLASH819.EXE||531.5 KB||11 Aug 1999|
To get the BIOS KR632 driver, click the green download button above. After you complete your download, move on to Step 2.
If the driver listed is not the right version or operating system, search our driver archive for the correct version. Enter BIOS KR632 into the search box above and then submit. In the results, choose the best match for your PC and operating system.
Tech Tip: If you are having trouble deciding which is the right driver, try the Driver Update Utility for BIOS KR632. It is a software utility which automatically finds and downloads the right driver.
Once you have downloaded your new driver, you'll need to install it. In Windows, use a built-in utility called Device Manager, which allows you to see all of the devices recognized by your system, and the drivers associated with them.
In Windows 10 & Windows 8.1, right-click the Start menu and select Device Manager
In Windows 8, swipe up from the bottom, or right-click anywhere on the desktop and choose "All Apps" -> swipe or scroll right and choose "Control Panel" (under Windows System section) -> Hardware and Sound -> Device Manager
In Windows 7, click Start -> Control Panel -> Hardware and Sound -> Device Manager
In Windows Vista, click Start -> Control Panel -> System and Maintenance -> Device Manager
In Windows XP, click Start -> Control Panel -> Performance and Maintenance -> System -> Hardware tab -> Device Manager button
Locate the device and model that is having the issue and double-click on it to open the Properties dialog box.
Select the Driver tab.
Click the Update Driver button and follow the instructions.
In most cases, you will need to reboot your computer in order for the driver update to take effect.
Tech Tip: Driver downloads and updates come in a variety of file formats with different file extensions. For example, you may have downloaded an EXE, INF, ZIP, or SYS file. Each file type has a slighty different installation procedure to follow.
For more help, visit our Driver Support Page for step-by-step videos on how to install drivers for every file type.