qs440bx-210.zip (148.6 KB)
2.10 (23 Aug 2001)
Step 2. Note the settings of the SETUP parameters. Enter SETUP by hitting the Delete or F1 or F2 key during boot up. Write down the settings for each of parameters. At the end of the BIOS update process you should load the setup defaults, and then re-enter these values you have written down.
Step 3. Insert a floppy disk into drive A. Format the floppy disk and make it bootable. (Make sure the floppy does not have a config.sys or autoexec.bat file on it)
Step 4. Extract the contents of the .ZIP file you downloaded, onto the bootable floppy disk that you created during Step 3.
Step 5. Place the bootable floppy containing the BIOS files into drive a: of the system that you want to upgrade and boot
Kodeeswaran (DG Staff Member) on 2004-10-09 05:50:04
The following files are found inside the driver download file.
|54021000.bin||262.1 KB||13 Feb 2001|
|AWDFLASH.EXE||31.1 KB||14 Aug 2000|
|flash.bat||44 bytes||23 Aug 2001|