Artec USB Flatbed Scanner Driver Reviews

User Reviews and Ratings

Only reviews are shown below.  Ratings submitted without a review are used in calculating the total ratings shown above, but will be displayed below.

3 of 4 people found the following review helpful:
alwaysshariff
Tested on Windows XP
23 Feb 2009
(29 minutes after download)
 

Installation:  out of 5
Stability:  out of 5
Compatibility: 1 out of 5
 
"Did not work. Scanner is a USB. Dont know why. I will try others in the list?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Eric Behm

26 May 2007
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"I dinīt know why - but my Ultima works better with the driver for Trust -:))"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
flick
Tested on Windows XP
1 Mar 2007
 

Installation: 4 out of 5
Stability: 1 out of 5
Compatibility: 1 out of 5
 
"Wouldn't work with my Artec"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Terryfier
Tested on Windows XP
24 May 2005
 

Installation: 1 out of 5
Stability: 1 out of 5
Compatibility: 1 out of 5
 
"This driver is marked as compatible with all windows versions, yet showed up as incompatible with the 16bit windows subsystem on WinXP Home Edition version 2002 SP1 and therefore un-usable."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Frank Beard

19 Jan 2005
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"No problems...works well"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
john engelen

14 Nov 2004
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 1 out of 5
 
"I load the wrong driver, I must have A driver for flatscanner artec-ultima2000"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
ray singh

20 Apr 2004
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"my win2000 would not open driver,no .inf file ,artec or ultimawebsites have a good driver 2.88mb"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Royston Bowen

9 Mar 2004
 

Installation: 4 out of 5
Stability: 4 out of 5
Compatibility: 4 out of 5
 
"no problems with driver"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Gunter Retterath

25 Feb 2004
 

Installation: 1 out of 5
Stability: 1 out of 5
Compatibility: 1 out of 5
 
"Not able to install on PC Windows 98. Computer advised: Damaged file."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Ronhny en RD

6 Jan 2003
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"Also works with XP. Do not download it with DAP."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Vernon Piatt

27 Dec 2002
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"The Artec Ultima 2000 Scanner is somewhat delicate. When it stops working it is generally because the small gear-belt roller needs the bearing surfaces cleaned and re-lubricated. Clean the roller and the post using a cotton swab dipped in alcohol and then lubricate it with a very light coat of wheel bearing grease. Clean te slidebar and re lube it with mineral oil or se
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
John

3 Sep 2002
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"This is one very good driver"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Mario

22 Mar 2002
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"can be used this driversin Windows XP?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Oliver

7 Mar 2002
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"I could not open this file. The system told me that itīs damaged...??"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Paul k

28 Feb 2002
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"It did not work. (damaged file)!!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Jacob Marquard

10 Oct 2001
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"Win2K pro OK. I installed the driver using a USB HUB - dont. When the scanner is directly plugged in the PC, there is no problems"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Jacob Marquard

10 Oct 2001
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"Error on Windows 2000 professionel. ServicePack 1. Installing the USB driver makes my PC boot instantly"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
paul

1 May 2001
 

Installation:  out of 5
Stability:  out of 5
Compatibility:  out of 5
 
"this is the second driver i have downloaded to no avail. can someone tell me how to get the scanner working... i must be doing something wrong. thanks paul"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 5 people found the following review helpful:
NetSurfer
Tested on UNIX
7 Dec 2007
 

Installation: 3 out of 5
Stability: 3 out of 5
Compatibility: 4 out of 5
 
"Worked in Linux, only some changes in a config file."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 5 people found the following review helpful:
kamiro
Tested on Windows XP
7 Jul 2007
 

Installation: 5 out of 5
Stability: 3 out of 5
Compatibility: 5 out of 5
 
"It worked with my Artec. The TWAIN modele UI is just terrible, goosh!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 

Add Your Review

Ratings & Reviews may be submitted after downloading and using or attempting to use the driver or firmware.

This website is not affiliated with Artec. All company names/logos are properties of their owners.
server: web4, load: 0.88