Instructions for use:
A. Flash firmware for DOS mode:
* IDE interface Drive: Before Flash Procedure, please make sure the following:
1 Build a boot disk (floppy) on Windows 98.
2 Unzip the firmware to the other one floppy disk.
3 Boot to DOS mode, and change the firmware disc.
4 If connect the drive to Secondary IDE Channel / Master. Please type "A:> FL 3".
5 If connect the drive to Secondary IDE Channel / Slave. Please type "A:> FL 4".
6 When it flashes to 100%, then finish. And restart computer.
* Warning! Flash program can't use on DOS mode of Windows!
The following files are found inside the driver download file.
|BDV316C F=0.20R/FL.BAT||68 bytes||7 Jul 2003|
|BDV316C F=0.20R/bide01.BIN||65.5 KB||25 Jun 2003|
|BDV316C F=0.20R/MTKFLASH.EXE||23.1 KB||13 Nov 2002|
|BDV316C F=0.20R/bide00.bin||65.5 KB||25 Jun 2003|