Driver was labeled for FCC ID I38-MMVN706 but works for my I38-MMVN705.
Just unzip the files to a temporary folder and run the setup program in the temporary folder from within windows.
One IRQ in the 10 to 15 range must be free.
Driver was likely written for win3.1, but works in 95. The TV card REQUIRES a ribbon cable to connect to the VESA feature pins on your graphics card. If you don't have the VESA feature connector, you are out of luck. An old IDE cable can be used as the ribbon cable - just make sure the pins on the tv card connect straight through to the same pins on your video board - and use the connectors on the ends of the cable - there must be no stubs. The readme.txt file included is fairly helpful.
The following files are found inside the driver download file.
|AZTV.AZT||163.3 KB||24 Aug 1996|
|README.TXT||30.5 KB||23 Aug 1996|
|README.COM||15.8 KB||19 Aug 1993|
|SETUP.EXE||279.2 KB||24 Aug 1996|
|ENGLISH.AZT||31.4 KB||23 Aug 1996|
|DISK1||8 bytes||30 May 1994|
|AZSYS.AZT||51.1 KB||27 Aug 1996|
|SETUP.BMP||13.2 KB||30 Dec 1993|
|SETUP.INF||11.2 KB||24 Aug 1996|
|AZWIN.AZT||386.6 KB||22 Nov 1996|