-Added Support for K6-II+ k6-III+
-The new patched bios supports Hard Disks up to 137 GB.
-Set "Y" as default on exit.
All you need to do is to flash with normal procedure as instructed below.
How to use AWDFLASH.EXE utility:
1. Please press F5 to bypass config.sys and autoexec.bat when booting to DOS.
2. Run utility as follow:
A:> AWDFLASH T2B_V26P.BIN <Enter>
3. On the utility picture, a message "Do you want to save BIOS (Y/N)" will be
displayed. If you want to save the BIOS on the motherboard for referance,
press 'Y'; then, utility will ask you to give path and filename for
backuping ROM BIOS.
4. Furthmore, a message "Are you sure to progr