2. System should boot into Windows 98SE/ME correctly if "USB Device Legacy Support" is enabled in the BIOS setup.
3. Support password length equal to 8 characters.
4. Support P4i45GV R 5.0 hardware reversion.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download the FLASH.EXE and copy FLASH.EXE to the just created boot disk in step 1.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save to the disk you created in step 2.
Boot from the disk you created in step 3.
At the "A:\" prompt, type FLASH, hit space bar once, and type BIOS file name then press <Enter>. For example: A:\FLASH K7VT2_1.20 &
The following files are found inside the driver download file.
|P4I45G_2.60||262.1 KB||17 Dec 2003|