This is the DOS driver to enable your Panasonic/Mat****a, Matshu****a, Creative Labs - CR-563B 2x proprietary drive. If you don't have Windows 9x installed and need your drive enabled so it will read the Windows installation disk, then you must use this driver first. Once loaded then you can install Windows 9x.
Unzip to a floppy and run the install.exe program to start the installation.
Note This is not an ide drive, it must be connected to a Panasonic interface card....
The following files are found inside the driver download file.
|CDMKE.SYS||13.4 KB||22 Feb 1995|
|INSTALL.EXE||102.8 KB||22 Feb 1995|
|INSTALL.DAT||5.8 KB||21 Feb 1995|
|README.DOC||4.9 KB||20 Mar 1995|
|FILE_ID.DIZ||152 bytes||8 Apr 1995|