BIOS Update Procedures
Copy these two files to a diskette awdflash.exe and xxxx.bin.
Go to A under DOS mode and run awdflash.exe. If there is emm386.sys in the config.sys, remove the emm386.sys from config.sys before running awdflash.exe.
Type the ".bin" file name (for example, 5200v106.bin, 6240107a.bin, etc.) when it prompts you for the BIOS data file name.
Type "N" when it asks you, "Do you want to save the old file?".
Type "Y" when it asks you, "Are you sure to flash the BIOS?".
DON'T touch anything until the screen shows F1-reset, F10-exit. Then click F1 to restart the system.
Go to CMOS setup utility to run LOAD BIOS DEFAULT then SAVE & EXIT.
The following files are found inside the driver download file.
|AWDFLASH.EXE||23.1 KB||12 Jun 1998|