1. Home
2. Manufacturers
3. WinBond
4. Network & Ethernet
5. WinBond W89C906F Driver
6. Reviews

WinBond W89C906F Driver Reviews

User Reviews and Ratings

Only reviews are shown below.  Ratings submitted without a review are used in calculating the total ratings shown above, but will be displayed below.

3 of 4 people found the following review helpful:

Lelo
Tested on MSDOS

12 Dec 2006

 

Installation:

Stability:

Compatibility:

 

"Works great on MSDOS"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Slurp
Tested on MSDOS

15 Jan 2005

 

Installation:

Stability:

Compatibility:

 

"This ZIP file contains a DOS based diagnostic tool among other things. It was what i was looking for (shows card IRQ and address so you can correctly use the standard Windows 9x NE2000 driver with it)"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Cristiano

25 Sep 2004

 

Installation:

Stability:

Compatibility:

 

"também funcionou.

"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

sonia

23 Mar 2003

 

Installation:

Stability:

Compatibility:

 

"i can´t open this archives,please, help me."

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Iqbal Sajid

20 Dec 2001

 

Installation:

Stability:

Compatibility:

 

"set and note down the irq and base addresses using this utility, and use novell ne2000 compatible or novel/antham ne2000 compatible adapter in any version of windows, and in resources put the previously noted irq and base address.. here u r on the network ) Thanks to www.driverguide.com its a great site.. )"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Basupriya Bhattacharyya

26 Jul 2001

 

Installation:

Stability:

Compatibility:

 

"Thank you very much. I hope that it will solve my problem"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Phil Hill

22 Feb 2000

 

Installation:

Stability:

Compatibility:

 

"As noted by others here, the file supplied is **Not** the driver that you are looking for. Instead do this... Unpack the file you've just downloaded and run the file "W906dm.exe" It will give you the address and IRQ settings of your card. (note these). Next install your card as the Novell NE2000 compatable, (some others will also work), and then set it's resourses to

See More

those previously noted. Worked for me after *HOURS* of frustration and fruitless searching. Good luck -)"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Bob Martine

30 Nov 1999

 

Installation:

Stability:

Compatibility:

 

"This file, although useful, is NOT A DRIVER OF ANY KIND! It is the setup utility to softset the IRQ and IO settings, as the card has no jumpers. The DOS driver ETNET.DOS works for this card, and you can find that driver on the Windows 95 CD"

Was this review helpful? (Report this)

 

3 of 4 people found the following review helpful:

Lura Whit

19 Oct 1999

 

Installation:

Stability:

Compatibility:

 

"This is the Chip editing Util for Manufactures of the NIC cards not a true "Driver" It's for DOS/Win9X"

Was this review helpful? (Report this)

 

Add Your Review

Ratings & Reviews may be submitted after downloading and using or attempting to use the driver or firmware.