Spacewalker HOT-569A Version 1.x and HOT-569 Version 1.x Driver
ENGLISH.zip (5.8 MB)
Version-ID is found on the mainboard next to the outer ISA-Slot!
- Chipset: Intel T-Chip 430 TX
- Bios: AWARD V4.51PG (Flash-EPROM, SDMS support)
- Power supply: AT and ATX power connector onboard
- Power Management:
ACPI (Advanced Configuration and Power Interface)
Suspend/Soft-off mode by power button (ATX power only)
Auto FAN off (system and CPU FAN power off in suspend mode)
- Slots: 4 x PCI, 3 x ISA
- onboard: 2-channel enhanced PCI IDE controller
PIO-mode 4, DMA Mode 2
supports "Ultra 33" synchronous DMA mode transfer up to 33 MB/s
- other interfaces:
Floppy, 2 x Ser. (Fifo, 16C550 comp.), PS/2-Mouse,
1 x Par. (SSP/EPP/ECP), 2 x USB, IR-Support
Davide (DG Member) on 19-May-2006
To get the Spacewalker HOT-569A Version 1.x and HOT-569 Version 1.x driver, click the green download button above. After you complete your download, move on to Step 2.
If the driver listed is not the right version or operating system, search our driver archive for the correct version. Enter Spacewalker HOT-569A Version 1.x and HOT-569 Version 1.x into the search box above and then submit. In the results, choose the best match for your PC and operating system.
Tech Tip: If you are having trouble deciding which is the right driver, try the Driver Update Utility for Spacewalker HOT-569A Version 1.x and HOT-569 Version 1.x. It is a software utility which automatically finds and downloads the right driver.
Once you have downloaded your new driver, you'll need to install it. In Windows, use a built-in utility called Device Manager, which allows you to see all of the devices recognized by your system, and the drivers associated with them.
In Windows 10 & Windows 8.1, right-click the Start menu and select Device Manager
In Windows 8, swipe up from the bottom, or right-click anywhere on the desktop and choose "All Apps" -> swipe or scroll right and choose "Control Panel" (under Windows System section) -> Hardware and Sound -> Device Manager
In Windows 7, click Start -> Control Panel -> Hardware and Sound -> Device Manager
In Windows Vista, click Start -> Control Panel -> System and Maintenance -> Device Manager
In Windows XP, click Start -> Control Panel -> Performance and Maintenance -> System -> Hardware tab -> Device Manager button
Locate the device and model that is having the issue and double-click on it to open the Properties dialog box.
Select the Driver tab.
Click the Update Driver button and follow the instructions.
In most cases, you will need to reboot your computer in order for the driver update to take effect.
Tech Tip: Driver downloads and updates come in a variety of file formats with different file extensions. For example, you may have downloaded an EXE, INF, ZIP, or SYS file. Each file type has a slighty different installation procedure to follow.
For more help, visit our Driver Support Page for step-by-step videos on how to install drivers for every file type.