Version 1.20 09-23-2003
Made a change to ensure the images to be displayed on an external CRT when Fn+F5 is pressed was used under Windows 98SE environment to toggle a display device from LCD to CRT.
Made sure the system would always recognize docking when the unit was docked and re-started through the start button under Windows 98SE environment.
Prevented the message "BIOS is damaged" from being displayed when the unit was powered on through AC without a battery installed, shut down after changing PnP resource in Windows and forcibly terminated by removing AC before the power LED was extinguished.
Added a CMOS setup (TSetup) function to allow enable/disable of the Secure Digital (SD) card controller