Vuego 640 P Driver Reviews

ot;

to the scanner since it didn't come there after you installed. For those who don't have idea, go to "setting" then double click "scanners and cameras" then click ADD. Choose EPPSCANNER. 2. After that, open the DEVICE MANAGER. There, you can see the one you added. Under IMAGING DEVICES you should see Color Flatbedscanner marked with the explamation which means you can't use it. JUST DOUBLE CLICK IT then close the DEVICE MANAGER. 3. Restart your computer. 4. Again, open the DEVICE MANAGER and you can see that the exclamation mark from Color Flatbedscanner has gone. 5. Now you can try it. IT WILL WORK!!! Well, as simple as that. GOOD LUCK!"

since it didn't come there after the installation. For those who don't have idea, go to "setting" then double click "scanners and cameras" then click ADD. Choose EPPSCANNER. 2. After that, open the DEVICE MANAGER. There, you can see the one you added. Under IMAGING DEVICES you should see Color Flatbedscanner marked with the explamation which means you can't use it. JUST DOUBLE CLICK IT then close the"

inish, and then go (menu)View>Refresh inside the Scanners/Camera window. When you try to Acquire it should be there. If not,reboot and check CtrlPanel>Scanners. It should be there. If not get a Linux distribution."

just install the “Adaptec AHA-151X/AHA-152X OR AIC6260 OR AIC6360 (no pnp)” then restart your computer. 5) Now, this is the most critical part. Open de System Manager and the go to the Device Manager, select the Scanner “ColorFlatbed_5” and double click it, then select the tab Drivers and select the button change driver, the new driver will be the next color flatbed scanner driver in the list. This is the order in which you may change the driver. a) Color Flatbed_5 b) Color Flatbed_13 c) Color Flatbed_16 d) Color Flatbed_19 e) Color Flatbed_20 f) Color Flatbed_21 g) Color Flatbed_23 NOTE that you don’t have to add new devices, just change the driver for the Scanner “ColorFlatbed_5” you installed before you must change the driver and accept the changes, then close the device manager and star again from step number 5. Do this until you have changed to all the Scanner Drivers listed before. 6) Uninstall the Adaptec SCSI AHA-151X/AHA-152X OR AIC6260 OR AIC6360 (no pnp) device. 7) Once you have done that and you have change to all the drivers listed previously, install the device listen at EPPSCANNER - Color Flatbed device. 8) Open the Image device screen from the control panel, there will be the Color Flatbed device listed, double click it and click on the TEST button. Then Restart your computer. And that’s all. That’s all, at least, my Acer Scanner 640P is now functional. Don’t blame me if yours don’t."

s the tough on the drivers are supposed to be installed in Xp."