This is a cross between Elitegroup's A101 and A102 soundcard drivers. I have a soundcard marked MJ-009R06 FCC ID# J98MF-009. With "PMP" jumper OFF, it was detected as an OPTi Audio 16. The reason for the mix of files is because the A102 setup program works with the board but will only setup IDE CD-ROM drives. Copying the drivers.zip and cdrom.cfg from the A102 drivers enabled setup of all four types of CD-ROM. In a modern PC with built in dual IDE and an IRQ assigned to video I had to use IRQ9 for the Mitsumi CD. It wouldn't allow DMA to be enabled for the CD so I will have to manually edit config.sys and see if I can make it work. The FCC on this is registered to Anchor Electronics.