1. Home
  2. Manufacturers
  3. Distributed Processing Technologies (DPT)
  4. Distributed Processing Technologies (DPT) DPT EISA SmartCache Plus PM2012B2/9x (updated) Driver
  5. Reviews

Distributed Processing Technologies (DPT) DPT EISA SmartCache Plus PM2012B2/9x (updated) Driver Reviews

User Reviews and Ratings

Only reviews are shown below.  Ratings submitted without a review are used in calculating the total ratings shown above, but will be displayed below.

3 of 4 people found the following review helpful:
kckc007

7 Nov 2005
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Worked axactly as intended, VG tick"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
sussextony
Tested on Windows 2003 Server
1 Mar 2005
 

Installation: 5 out of 5
Stability: 4 out of 5
Compatibility: 4 out of 5
 
"At last a driver that works with my PM2044UW scsi card before it hit the bin!!! Of course I had to upgrade to XP server before I found this driver. I wonder if it would have worked with Win2K server. Thanks for the driver"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Mirko
Tested on Windows XP
30 Dec 2004
 

Installation: 4 out of 5
Stability: 4 out of 5
Compatibility: 4 out of 5
 
"I use this driver with PM3224a card from DPT and it works Fine."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Egze

23 Nov 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Installation finished successfully... (Win XP Prof/SP1 & PM2124A) - THANX Fabio"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Dan

5 Jun 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"What a surprise, working in XP/SP1 1)get dos driver / setup disk from adaptec to run dptmgr program in dos 2)update card to new firmware (this was critical as getting unknown device raidvolume before) 3)define raid array with dptmgr in dos 4)boot xp and install this xp driver, detects raid array as single drive, use disk manager to format 5) have a beer"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Nick

22 Mar 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"These drivers don't work in XP. Please make them work I really need them. I thank you for your continual support"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Insp

20 Mar 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"Pure channel seemed to work. however windows xp ask for driver for the SCSI array device. I think it should be asking for the raid function. No idea where to find the driver?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Phill

26 Jan 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"worked up to the point where sp3 for 2k was installed"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 

Add Your Review

Ratings & Reviews may be submitted after downloading and using or attempting to use the driver or firmware.

This website is not affiliated with Distributed Processing Technologies (DPT). All company names/logos are properties of their owners.
Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web5, load: 1.12