sc101t_firmware_1_1_3.bin (933.0 KB)
Storage Central Turbo
SCM Version 3.0.6 and Firmware Version 1.1.3 (supports Vista)
To Manually Upgrade the firmware
# Right-click and Save to download the firmware to a convenient place such as your desktop.
# Run the SCM utility. (Close and restart the SCM Utility if you already have it open).
# Go to "Advanced Configuration" mode.
# Select any hard disk in the list and click Next.
# In the Task Page, select Firmware upgrade, and click Next. The authentication page displays.
# Enter the administrator password, which is password, unless you changed it from the default. An "Authentication successful" message appears.
# Click Next.
# Browse to where you saved the new firmware (sc101t_firmware_1_1_3.bin) on your PC, select the f
Manivannan (DG Staff Member) on 17-Oct-2007