Description :HP Officejet T, 700, 600, 500 series installation
This document contains information about the HP Officejet T, 700, 600, 500 series and the Microsoft Windows XP Home Edition and Professional operating system.
Contents
Installation instructions
Microsoft Windows XP system requirements
Additional information
HP product support
Installation instructions
IMPORTANT: Start with Step A, and complete the steps in order.
Step A: UNINSTALL prior Officejet software and POWER OFF your Officejet.
Click Start, click All Programs, point to HP Officejet, and then click Uninstall Software.
POWER OFF your Officejet and leave it powered off until the installation program prompts you to power it on.
Restart your computer.
Step B: Confirm that ECP (Exte
nded Capabilities Port) Mode is enabled.
Your computer's parallel port must be set to ECP mode, which allows greater communications capabilities through the parallel port. Perform the following steps to confirm that ECP mode is enabled:
Click Start and then click My Computer.
Under Tasks, click View System Information to display the System Properties page.
Click the Hardware tab, and then click Device Manager.
Double-click on Ports (COM & LPT). If you see "ECP Printer Port (LPT1)" listed under Ports, ECP mode is enabled and you can proceed to Step C.
Otherwise, restart your PC and press the indicated key (F1, F2, or DEL) to enter your computer's BIOS or "Setup" program (refer to your PC's documentation or vendor's web site for more information). Once you have entered Setup, locate the configuration section for your Parallel Port and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save your changes and restart your PC.
Step C: Install the Officejet Software for Windows XP
During installation, Windows will display screens recommending that you stop installation because the Officejet software has not passed Windows Logo testing. Hewlett-Packard has tested this Officejet product with Windows XP and verified compatibility. When screens like the one shown below appear, click Continue Anyway.
Perform the following steps to install the Officejet software for Windows XP:
Log on using a local Administrator account; do not attempt to install the HP Officejet as a Remote Administrator, Power User, or Guest.
Make sure that no applications (including Norton System Doctor or virus checkers) are running. Open Windows Task Manager by right-clicking an empty space on the taskbar, and then click Task Manager. Click the Applications tab, select any applications that are running, and click End Task. When the list of tasks is empty, close Windows Task Manager.
Double-click on the installation file for your HP Officejet product and language (e.g., oj700_ENU_xp1407.exe) and click Finish to accept the default Installation Folder. If you are reinstalling the Officejet software, you may get an Overwrite Protection warning. If so, click "Yes to All" to proceed with the installation.
When the HP Officejet Essentials screen appears, click Install and follow the prompts that appear on the screen.
When prompted to do so, power on the HP Officejet and make sure it is connected to your computer.
In a few moments, several Found New Hardware Wizard screens will appear. Accept the recommended action on each screen by clicking Next or Finish to continue. If the Found New Hardware Wizard screens do not appear, restart your computer.
When the HP Officejet Fax Setup Wizard appears, provide the requested information.
Click Print Test Page to verify that your installation was successful.
Click View the ReadMe File for important information about what is supported.
return to contents
Microsoft Windows XP system requirements
PC with 300 megahertz (MHz) or higher processor recommended (233 MHz minimum required); Intel Pentium/Celeron family, AMD K6/Athlon/Duron family, or compatible processor recommended
128 megabytes (MB) of RAM or higher recommended (64 MB minimum supported)
300 MB of available hard disk space, plus 50 MB for full color scanning
Super VGA (800 Ã? 600) or higher resolution video adapter and monitor
CD-ROM drive
available parallel port with Extended Capabilities (ECP)
IEEE-1284 compliant parallel cable
sound card and Internet access recommended
Additional information
Windows XP 64-bit and Server Editions are not supported
Networking is not supported
Printing from DOS, printing from DOS programs, or printing from a DOS box within Windows is not supported
Local Administrator and User account types are supported
Power User and Remote Administrator account types are not supported
Local Guest user account types are supported with limited functionality; for example, Guests cannot scan to email or edit phone book entries
Product Tour, Optical Character Recognition (OCR) software, and other non-HP software is not included
Fast User Switching is not supported
see http://www.hp.com/go/windowsxp for more information
return to contents
HP product support
If you have access to the Internet, you can obtain additional information and support by clicking on the link below that corresponds with your HP Officejet product and language. Information varies by product and country, but typically includes frequently asked questions, solutions to common problems, setup and install information, how to use and maintain your HP Officejet product, software and driver updates, manuals, and information on calling or e-mailing HP for support.
For a list of current HP customer support telephone numbers, visit http://www.hp.com and choose your country or region.
T series
700 series
600 series
500 series
English Support
T45
T65
700
720
600
630
500
580
T45xi
T65xi
710
725
610
635
520
590
570
Acknowledgements
Windows® and MS Windows® are U.S. registered trademarks of Microsoft Corp.
Copyright © Hewlett-Packard Co. 2001. This information is subject to change without notice and is provided "as is" with no warranty. Hewlett-Packard shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this material.