1. Home
  2. Manufacturers
  3. CalComp
  4. CalComp Techjet Designer 5424 Driver
  5. Reviews

CalComp Techjet Designer 5424 Driver Reviews

User Reviews and Ratings

Only reviews are shown below.  Ratings submitted without a review are used in calculating the total ratings shown above, but will be displayed below.

4 of 5 people found the following review helpful:
Tammy

23 Mar 2004
 

Installation: 4 out of 5
Stability: out of 5
Compatibility: out of 5
 
"this driver did not work for me."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
4 of 5 people found the following review helpful:
jhonea1

29 Feb 2004
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"My setup: WinXP home with AutoCAD2000i, TechJet 720c. I tried driver but scaling was all sorts of messed up and I couldn't get it to work out. Then I searched Autodesk's knowledge base and learned that the plotter manager within AutoCAD can setup drivers for CalComp plotters, including this one. That worked great."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
4 of 5 people found the following review helpful:
peter rhodes

23 Feb 2004
 

Installation: 5 out of 5
Stability: 4 out of 5
Compatibility: 4 out of 5
 
"this driver works for us with AutoCAD 2003, WinXPP, and a techjet 720. I am using a HP external jetdirect box to plot over our LAN. occasionally, the plotter spools a plot endlessly but using the front panel to clear all data sets it going again. so still a bit of tweaking needed. but hey, better than no plotter at all !!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
4 of 5 people found the following review helpful:
salvino

4 Dec 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"don't try to download with a download manager ... the driver work soo good, soo fast and ..."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
4 of 5 people found the following review helpful:
salvino

4 Dec 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"why i can't dowload this file???"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
4 of 5 people found the following review helpful:
Carsie Denning

27 Jun 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"The driver worked great except for the fact that I could not print out an Arch Size E drawing. Is there anything that I can do to make this work."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
4 of 5 people found the following review helpful:
Herman Leung

27 May 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"I have trouble make it work with WindowXp. Plotter didn't response while plotting from AutoCAD2000."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
4 of 5 people found the following review helpful:
Nicholas Liew

12 Feb 2003
 

Installation: out of 5
Stability: out of 5
Compatibility: out of 5
 
"The above file works fine with XP, Loads up easy and no problems with Printing. Prints and plot OK. Printer model 5424- techjet designer 720 A lot of tweaking for the borders etc...."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
quietasamouse
Tested on Windows XP
17 Sep 2006
 

Installation: 5 out of 5
Stability: 4 out of 5
Compatibility: 4 out of 5
 
"do not bother with calcomp's drivers. after about an hour of "google next", stumbled onto this driver. it installed immediately and has worked printing wonderfully. now if i could just figure out how to load the paper properly so it will cut it at the right place. :) (i think i sort of have it!) which reminds me, i have only tried using the roll. have not
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Julie Ohlund
Tested on Windows XP
21 Mar 2006
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"This worked perfectly for me with Windows XP and AutoCAD 2006. My only complaint would be the right hand margin is a little larger than optimal. Would actually appreciate help with that, if there are any ideas or fixes."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Ian
Tested on Windows XP
9 Mar 2006
 

Installation: 5 out of 5
Stability: 4 out of 5
Compatibility: 5 out of 5
 
"Loaded on XP without faults (SP 2) printer works with Autocad - Adobe Reader. Good Driver"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Wayne Vaughn
Tested on Windows XP
14 Apr 2005
 

Installation: 4 out of 5
Stability: 4 out of 5
Compatibility: 4 out of 5
 
"I tried several drivers & even talked with Calcomp. Nothing worked, but this driver did. Thanks to whoever posted this driver."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Doug Smith
Tested on Windows 2000 Professional
24 Feb 2005
 

Installation: 2 out of 5
Stability: 4 out of 5
Compatibility: 5 out of 5
 
"Am now trying (so far unsuccessfully) to install on XP Pro."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Rob F
Tested on Windows XP
6 Jan 2005
 

Installation: 4 out of 5
Stability: 3 out of 5
Compatibility: 4 out of 5
 
"Installed and worked just like that!"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Christopher Gittinger

21 Oct 2004
 

Installation: 4 out of 5
Stability: 4 out of 5
Compatibility: 4 out of 5
 
"I am having a problem that might not be the drivers fault. My plotter will not put ink on the page. if anyone can help please write me back. Thanks"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Meridian

7 May 2004
 

Installation: 3 out of 5
Stability: 4 out of 5
Compatibility: 1 out of 5
 
"This driver gave very disappointing performance for Windows XP with AutoCAD 2000. The scaling was way out and the output quality poor."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Michelle Johnson

4 May 2004
 

Installation: 5 out of 5
Stability: 5 out of 5
Compatibility: 5 out of 5
 
"This driver works very well in windows xp."
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 
3 of 4 people found the following review helpful:
Emmanuel Garcia

8 Apr 2004
 

Installation: 4 out of 5
Stability: 4 out of 5
Compatibility: 1 out of 5
 
"The output is stretched so things are twice as tall as they should be. How can this be fixed?"
spacer
Was this review helpful? Yes, it was helpful No, it was not helpful (Report this)
 

Add Your Review

Ratings & Reviews may be submitted after downloading and using or attempting to use the driver or firmware.

This website is not affiliated with CalComp. All company names/logos are properties of their owners.
Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web4, load: 1.89